Filter By:
- Parts & Accessories (15)
- CO2 Inflators (28)
- Floor Pumps (12)
- Frame Pumps (1)
- Mini Pumps (22)
- Shock Pumps (3)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pumps/Inflation
$5.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$8.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
$24.99
Specs:
- Capacity—120psi
- Weight—205g
- Length Closed—230mm
- Length Open—325mm
Features:
- High Pressure/High Volume Modes
- 5in hose reach for easy pumping
- Thread on Pump Head
- Quick Change Presta/Schrader Compatible
$25.00
Inflating up to 120psi and handling both Presta and Schrader valves, Control Tower 4 is constructed with a reinforced composite barrel and plastic base. With an ergonomic handle it comes fully loaded with a ball needle and inflator for a practical, multi purpose pump.
- DoubleHead valve
- Ball inflator accessories included
- Plastic barrel and base
- Durable steel shaft
$27.00
Get back on the road fast with Control Blast 0. Featuring a reversible head for Presta & Schrader with a valve knob which unwinds to apply just the right amount of pressure.
Features
- Easy fill rate control knob
- Threaded Presta and Schrader valve compatible system
- Alloy construction
- Head only (cartridge not included)
- Compatible with threaded cartridges
$17.99
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader.
- Compact design for easy storage
- Alloy construction for durability and lightweight
- Press on for both Schrader and Presta valves
- Compatible with all 3/8" threaded compressed air cartridges
$25.00
Giant's Control Blast 1 CO2 Inflation Kit consists of an inflator head that fits Presta valves, a cartridge sleeve, and a 16-gram CO2 threaded cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.
$45.00
Giant's Control Mini Road+ Pump boasts a lightweight, durable CNC-machined aluminum barrel made to pump up high-pressure road bike tires quickly. Plus, this mighty mini features a hose for easy, confident inflation which hides inside for a clean look and works on all valve types.
$45.00
- Rotatable 1.25” gauge
- Pinch-Free T-handle design
- High Pressure/High Volume switchable system
- Fold out foot pad for fast, stable inflation
- Roller System valve head eliminates twisting while threading onto valve
- 120 PSI Max
$70.99
- Easy-to-read 2.5" gauge
- Steel barrel and base
- Ergonomic sweeping handle with ball inflation accessory storage
- AutoHead™ with metal accents and pressure release button
- 160psi rating
$27.99
Quick Overview
- Telescoping Handle Inflates High-Volume Tires Fast
- Presta and Schrader Valve Compatible
- Metal Alloy Body
- Flip-Out Pump Handle
- Frame Mounting Bracket With (2) Longer Allen Bolts Included
Limited Lifetime Warranty
Serfas® warrants to the original purchaser that your pump is free of defects in material, construction, and/or workmanship for the lifetime of the product.
Features:
- Telescoping Handle Inflates High-Volume Tires Fast
- Dual Head – Presta/Schrader Valve Compatible
- Metal Alloy Body With TPU Overmolded Grips
- Compact Size Fits Jersey Pockets Or Small Packs
- Frame Mount Bracket (Included) Can Mount Between Frame and Bottle Cage
- (2) Longer Length Allen Mounting Bolts Included
Specs:
Dimensions:
- Pump Length:
Fully Telescoped Open w/ “T” Handle Deployed: 17 7/8? (454mm)
Closed: 10? (254mm)
- Barrel Diameter: 0.98? (25mm)
- Capacity: 100 PSI
- Weight: 200 Grams
- Color: Black, Gray, Brushed Metal Alloy Body
$17.00 - $24.99
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged.
- Compact, lightweight design fits in tight spaces
- Press-on for both Presta and Schrader valves
- Compatible with 3/8” threaded cartridges
- Rotate CO2 cartridge to regulate inflation
- Kit includes CNC-machined aluminum inflator head with a green finish for better visibility
$32.99
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation!
• Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately)
• All metal aluminum design
• Easy to use and fully controllable
• Push-to-Inflate technology
• Works with both Presta and Schrader valves
• Includes one 16 gram and one 20 gram threaded CO2 cartridge
• Weight: 16 grams
$35.00
- AutoHead technology
- V-shaped ergonomic plastic handle
- Durable stainless steel barrel and steady plastic base
- Over-sized 3" analog gauge
$39.99
The Control Go mini pump series delivers high pressure or high volume air output, two-in-one hybrid manual and CO2 inflation functionality as well as an integrated gauge that measures tire pressure on the go.
$12.75
Giant's Control Blast 16-gram Threaded CO2 Cartridges are the replacement cartridges for Giant's Control Blast and other inflators that accept this type (CO2 inflators sold separately).
• Foam-padded cartridge provides insulation
$10.99 - $19.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$44.99
Composite and steel floor pump – Arcade White
A strong and dependable pump belongs in every garage or basement. Our redesigned Comp floor pump features a big 3" integrated gauge, steel barrel and the Dual Head for Presta and Schrader valves. With included sport ball needles and classic good looks, it’s designed for smooth, efficient and accurate inflation.
- Super-tough steel barrel and plunger with a composite base
- Anatomically designed handle for comfortable air compression
- Dual Head fits both Presta and Schrader valves
- Oversized 3 inch 160 psi dial gauge
- Pressure rated to 200 psi
- Needles included for pumping up sports balls
- Large base for stability
- Rebuildable
- Height: 25”
$64.99
- Durable fiber-reinforced Composite Matrix construction
- Optimized side-load design for easy access in compact frames
- Available in right-side configuration only
- Integrated storage container
- CO2 cartridge holder on both sides of the cage
- Integrated storage container includes CO2 head, V Pro 17 multi-tool with tubeless reamer, and tire plug kits
- Includes two 20g CO2 cartridges
$56.00
- Includes everything for a quick fix while on or off-road
- Liv seat bag
- 12 glueless patches
- 2 tire levers
- Mini pump
- 9 function multi-tool
$45.00
Giant's Control Mini CO2 Pump boasts a lightweight aluminum barrel that doubles as a micro-sized pump and CO2 inflator. It holds two CO2 cartridges when attached to your bike with the mount, handles all valve types, and pumps up to 120psi into your tires.
$57.50
Air Force Tier Three floor pump
- Premium Rubber Overmolded Ergonomic Handle
- Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR)
- Larger More Stable Pump Base
- Simple Valve Head (Presta/Schrader)
- Integrated Hose Keeper
- All Metal Barrel and Pump Base
- 28 1/2" Pump Height
$55.00
- Includes everything for a quick fix while on or off-road
- Giant seat bag
- 12 glueless patches
- 2 tire levers
- Mini pump
- 9 function multi-tool
$17.99 - $20.99
CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge.
- Weight: 26g
- Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components
- CNC machined aluminum parts for precise and durable construction
- Press on/off valve operation functions like a trigger, providing easy and precise inflation
- Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves
$25.99 - $27.99
Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges.
- CNC-machined aluminum dispenser with brass internals
- CNC control knob twists for easy and controlled inflation
- Twin Slip Chuck head presses on to Presta and Schrader valves
- Neoprene sleeve insulates hand from cold during discharge
- Compatible with threaded CO2 cartridges (sold separately)
$34.99
Compact and super efficient high pressure bicycle hand pump featuring a knurled barrel for superior grip while pumping. Its proven engineered design with an overlapping handle is constructed from machined aluminum, providing superior durability, minimal weight and all of the style. The integrated ABS Flex Hose is presta and shrader valve compatible, and greatly improves pumping action and ergonomics. This mini pump is completely rebuildable and made with the best materials available. With up to 120 PSI (8.3 BAR) of pumping power, the Grip Drive HP is excellent for all high-pressure bicycle tire applications.
- 230 mm, 105g
- 120 psi, 8.3 bar.
- Grip Textured CNC machined aluminum construction with compact overlapping handle.
- Presta and Schrader valve compatible ABS Flex Hose.
- Includes Composite Matrix frame mount
$26.99 - $27.99
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges.
- CNC machined aluminum dispenser with brass internals
- CNC control knob twists for easy and controlled inflation
- Twin Slip Chuck head presses on to Presta and Schrader valves
- Neoprene sleeve insulates hand from cold during discharge
- Compatible with threaded CO2 cartridges
- Comes with one 16g cartridge
$32.00 - $40.00
- Easy-to-read 3.0" gauge
- AutoHead™ with ball inflator accessories
- Aluminum barrel and plastic base
- 160psi rating
$55.99
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage.
- CO2 inflator that features a gauge as well
- Flow is adjustable using special feature
- Compatible with both Presta and Schrader valves
- Presta/Schrader with integrated dust cap, Push to inflate
- Gauge: Reads 160 psi / 11 bar, 1-1/2” analog
- Engineering-grade polymer
- Weight: 45g /1.59 oz
- Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3”
- Accepts threaded cartridges
- CO2 cartridges sold separately
$6.99
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
Page 1 of 3
Next page