Packs/Racks/Baskets

One of the best selling items in Wald's entire catalog, this basket set the precedent for quick-release convenience and is perfect for carrying small bags of groceries. - Made in U.S.A. (Maysville, KY) - This Quick Release Baskets comes with a detachable Slip-on Holder for simple installation - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14 x 9.5 x 9 inches; the basket tapers to 12.25 x x 7 inches - Holder is designed to fit 7/8" handlebar, hooks are 4 1/2" apart - Available in white (133WH) or black (133GB) Powder Coat Finish - Complete basket including the holder weighs 2.4 lbs.

This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.

The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

A solid aluminum seatpost mount providing an extra location for a water bottle cage on e-bikes or smaller frames. MATERIAL - Diecast aluminum DROPPER POST DIAMETER - Fits ø27.2 - ø31.6 mm (shims incl.) ADDED FEATURE - Compatible with water bottle cage, Topeak BackLoader, tail light and saddle bag SIZE - 13.6 x 6.2 x 4.6 cm / 5.4" x 2.4" x 1.8"

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

A sturdy handlebar-mounted metal basket for shopping trips, quick jaunts around town. New QuickClick Handlebar Mount (Fixer 3e) allows installation on eBikes to make attachment and removal a breeze. - Capacity: 16L/975 Ci - Weight: 1370G/3.02 Lb - Size: 35x26x25cm/13.8”x10.2”x9.8” - Attachment: QuickClick Handlebar Mount (Fixer 3e) Fits 25.4mm and 31.8mm handlebars (shims included)

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb

Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb

- The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to level independent the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook and loop strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags.

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

A purpose-built bike gear bag for the dedicated cyclist, with infinite organization to house wearables and accessories from one ride to the next. Features - Keep all your cycling gear available and organized from wherever your ride begins—at the trailhead, race start, weekend destination or at home - 55L total capacity holds 3-5 days of road bike or mountain bike gear, including seasonal accessories - Organize coordinating kits, jackets and accessories in individual cell pockets - Visibility and efficient access to all compartments thanks to the bag structure and wide opening - Dedicated shoe pocket is lined with tarpaulin for easy cleaning - Comfortably pack any size road or trail helmet in the dedicated compartment - Store dirty laundry or after-ride clothing in the versatile lid pocket - Wear the removable shoulder strap in cross-body configuration for stable carrying while walking or riding a bike - Keep nutrition, small tools or race supplies visible but separate from clothing in front pocket - Protect GPS or keep wallet secure in the exterior zipper pocket Technical specifications - Dimensions: 26.4 x 14.2 x 11.8 in - Volume: 55L - Weight: 2.84 lb - Material: Polyester

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

The R-Series Rear Cargo Rack is a premium lightweight rack designed specifically for the SUPER73-R and SUPER73-RX. This versatile rack can carry loads of up to 10 lbs, securable to the R-Series aluminum frame, and features integrated passenger handholds. Compatibility: R, RX

Top off the look of your child's cruiser with Sunlite's Willow Mini Strap-On Basket on the front! It attaches to the handlebars via handlebar straps and buckles for easy on and off. The tightly-woven willow ensures small items stay in the basket, and the retro design is sure to elicit compliments.

Sunlite's Willow Classic Basket attaches to your handlebars via leather handlebar straps and buckles so it will be ready for a spontaneous jaunt to the park! The tightly-woven willow ensures small items stay in the basket, and the cool design is sure to elicit compliments.

Top off the look of your retro ride with Sunlite's Willow Bushel Strap-On Basket on the front! It attaches to your handlebars via handlebar straps and buckles for easy on and off. The tightly-woven willow ensures small items stay in the basket, and the bushel design is sure to elicit compliments.

Quick Review: - Easy To Grab Handle - Snap in Mesh Bag - Quick Release Bracket - 1" Mounting Bracket - Durable Steel Construction

This bag is compatible with the patented Integrated Clip System and includes a black water-resistant cover with reflective graphics for added safety. It features a compact design with a half-liter volume and an internal pocket for enhanced organization. - Dimensions: 131mm long x 106mm wide - Weight: 102g

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

- Reflective logo on the back and both sides - Made of environmentally PVC-free material - 1 side compartment - Volume: 0.4L

Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.

Quality trumps quantity, and with the Savu 2 less can certainly be more. Reach for this single-bottle lumbar pack for quick laps on your favorite trails. Offering enough storage capacity for ride essentials, such as a spare tube, CO2, multi-tool and snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Bottle Carry The perfect solution for stable lumbar carry allows you to access your bottle(s) with ease. For short rides without water, the bottle pockets compress to maintain stability and keep the pack close to your body. Water bottles not included. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Easy-access angled padded bottle sleeve - Easily accessible split zippered side compartments with internal tool organization - Blinker light attachment with reflective graphic - Extra thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Riders looking for a low-profile lumbar pack with integrated hydration need look no further than the Seral 4. This slim waistpack features a 1.5-liter bladder with our updated high-strength magnetic coupling for improved hose management even in rough terrain. the Seral 4 has enough storage capacity for ride essentials, such as a spare tube, CO2 and multi-tool and, of course, snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5 L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Main compartment tool organization and internal zippered pocket - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit